Synthesis of N-heterocyclic carbene gold(I) complexes from the marine betaine 1,3-dimethylimidazolium-4-carboxylate.

The marine natural product norzooanemonin (1,3-dimethylimidazolium-4-carboxylate) has been used to prepare a series of carboxyl- or carboxylate-functionalized N-heterocyclic carbene (NHC) gold(I) complexes from [(Me2S)AuCl] in the presence of potassium carbonate. The potential of the resulting mono- and dicarbene complexes to act as cytotoxic or antibacterial drugs was investigated.

Synthesis of Stable Potassium Phosphinophosphides and Reaction with Organosilyl Halides and Chlorophosphanes.

The synthesis of sterically demanding 2,6-bis(2,4,6-trimethylphenyl)phenyl (Ter)-stabilized and H-substituted diphosphanes TerHP-PR2 (4a-4c) via conversion of the phosphide TerPHK (2) with secondary chlorophosphanes ClPR2 (3a-3c, where R = iPr, Ph, and tBu, respectively) is described. The diphosphanes 4a-4c were deprotonated using KH in tetrahydrofuran, selectively yielding the potassium phosphinophosphides K[TerP-PR2] (5a-5c). These phosphinophosphides are stable in solution as well as in the solid state and can be further functionalized via salt-metathesis reactions. Reaction with organosilyl halides selectively yields the silylated diphosphanes Ter(SiR12R2)P-P(iPr)2 (6a and 6b, where R1 = R2 = CH3 and R1 = CH3, R2 = Ph, respectively), whereas conversion with chlorophosphanes selectively yields the triphosphanes R12P-P(Ter)-P(iPr)2 (7a and 7b, where R = iPr and Ph, respectively).

Imidazolin-2-iminato Cerium(IV) Chlorides: Synthesis, Structure and Electrochemical Properties.

The ligand field greatly affects the redox properties of cerium. Herein, cerium(III) and cerium(IV) complexes supported by imidazolin-2-iminato ligands were synthesized and structurally characterized, and their electrochemical properties were investigated. Silylamine elimination of cerium(III) amide Ce{N(SiMe3 )2 }3 with imidazolin-2-imine ImR NH (R=Mes, tBu, iPr) provided imidazolin-2-iminato cerium(III) complexes, [(ImMes N)(ImMes NH)Ce{N(SiMe3 )2 }2 ] (1), [(ImtBu N)2 (ImtBu NH)Ce{N(SiMe3 )2 }] (2) and [(ImiPr N)2 (ImiPr NH)Ce(µ-ImiPr N)]2 (4) in 71-85% yields. These cerium(III) complexes were successfully oxidized by Ph3 CCl or C2 Cl6 to afford imidazolin-2-iminato cerium(IV) chlorides, [(ImMes N)2 Ce{N(SiMe3 )2 }Cl] (5), [(ImtBu N)3 CeCl] (6) and [(ImiPr N)2 Ce(µ-ImiPr N)Cl]2 (7) in 70%-76% yields. All complexes were characterized by the single-crystal X-ray diffraction, which showed that 1, 2, 5 and 6 are monomers while 4 and 7 are dimers. The electrochemical studies indicated that the Ce(III/IV) couples for 5 and 6 are more negative than those of silylamido cerium(IV) complexes, and the Ce(III/IV) couples for 1 and 2 have a similar trend.

Dimorpholinoacetylene and Its Use for the Synthesis of Tetraaminocyclobutadiene Species.

The new diaminoacetylene (DAA) dimorpholinoacetylene (3) was prepared from 1,1-dimorpholinoethene (1) by bromination to form the dibromoketene aminal 2, which upon lithiation afforded 3 through a Fritsch-Buttenberg-Wiechell rearrangement. Heating 3 at elevated temperatures resulted in a complete conversion into the dimer 1,1,2,4-tetramorpholino-1-buten-3-yne (4), which was used for the synthesis of four-membered cyclic bent allene (CBA) transition-metal complexes of the type [(CBA)MLn ] (5-7; MLn =AuCl, RhCl(COD), RhCl(CO)2 ; CBA=1,3,4,4-tetramorpholino-1,2-cyclobutadiene; COD=1,5-cyclooctadiene). The reaction of 3 with tetraethylammonium bromide gave 1,2,3,4-tetramorpholinocyclobutenylium bromide (8), which reacted with bromine to form 1,2,3,4-tetra(morpholino)cyclobutenediylium bis(tribromide) (9). Compound 9 represents the first fully characterized compound containing a tetraaminocyclobutadiene dication and displays a nearly planar C4 N4 core as shown by X-ray diffraction analysis. Detailed quantum chemical calculations were performed to assess the aromaticity of tetraaminocyclubutadiene dications by employing the Nucleus Independent Chemical Shift (NICS) method and current density analysis.

Titanium complexes with unsymmetrically substituted imidazolin-2-iminato ligands.

The reaction of the unsymmetrical N-heterocyclic carbenes 1-(2,4,6-trimethylphenyl)-3-(adamantyl)imidazolin-2-ylidene (IAdMes, 1a) and 1-(2,6-diisopropylphenyl)-3-(adamantyl)imidazolin-2-ylidene (IAdDipp, 1b) with trimethylsilyl azide furnished the 2-(trimethylsilylimino)imidazolines 2a (ImAdMesNSiMe3) and 2b (ImAdDippNSiMe3). Desilylation by stirring in methanol gave the corresponding imidazolin-2-imines 3a (ImAdMesNH) and 3b (ImAdDippNH). 2a and 2b were treated with [TiCl4(THF)2] (THF = tetrahydrofuran) and [CpTiCl3] (Cp = η5-C5H5) to form the mono- and bis(imidazolin-2-iminato) titanium(IV) complexes [(ImAdRN)TiCl3] (4, R = Mes, Dipp), [Cp(ImAdRN)TiCl2] (5, R = Mes, Dipp), and [(ImAdRN)2TiCl2] (6, R = Mes, Dipp). The crystal structures of all compounds except 2b were determined by X-ray diffraction analysis.

N-Heterocyclic Carbenes Carrying Weakly Coordinating Anions.

In this Concept article we provide a brief overview of the design and preparation of N-heterocyclic carbenes carrying weakly coordinating anions (WCA-NHCs). The anionic charge in these ligand systems is located on an exocyclic group, for example, B(C6 F5 )3 , tethered to the backbone of the imidazole ring, thus resembling a weakly coordinating moiety. With the general guiding principle behind the application of WCA-NHCs being the conversion of otherwise cationic NHC complexes into their overall neutral congeners, numerous transition metal as well as main group element complexes were isolated during the last decade, which are summarized herein.

N-Heterocyclic Carbene-Phosphinidenide Complexes as Hydroboration Catalysts.

The reactions of the N-heterocyclic carbene-phosphinidene adducts (NHC)PSiMe3 and (NHC)PH with the dinuclear ruthenium and osmium complexes [(η6-p-cymene)MCl2]2 (M = Ru, Os) afforded the half-sandwich complexes [(η6-p-cymene){(NHC)P}MCl] and [(η6-p-cymene){(NHC)PH}MCl2] with two- and three-legged piano-stool geometries, respectively (NHC = IDipp, IMes; IDipp = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene; IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene). The complexes were initially tested as precatalysts for the hydroboration of benzonitrile, and the most active species, the ruthenium complex [(η6-p-cymene){(IMes)P}RuCl], was further used for the efficient hydroboration of a wide range (ca. 50 substrates) of nitriles, carboxylic esters, and carboxamides in neat pinacolborane (HBpin) under comparatively mild reaction conditions (60-80 °C, 3-5 mol % catalyst loading). Preliminary mechanistic and kinetic studies are reported, and stoichiometric reactions with HBpin indicate the initial formation of the monohydride complex [(η6-p-cymene){(IMes)P}RuH] as the putative catalytically active species.

Rhodium and Iridium Complexes of Anionic Thione and Selone Ligands Derived from Anionic N-Heterocyclic Carbenes.

The lithium salts of anionic N-heterocyclic thiones and selones [{(WCA-IDipp)E}Li(toluene)] (1: E=S; 2: E=Se; WCA=B(C6 F5 )3 , IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene), which contain a weakly coordinating anionic (WCA) borate moiety in the imidazole backbone were reacted with Me3 SiCl, to furnish the silylated adducts (WCA-IDipp)ESiMe3 (3: E=S; 4: E=Se). The reaction of the latter with [(η5 -C5 Me5 )MCl2 ]2 (M=Rh, Ir) afforded the rhodium(III) and iridium(III) half-sandwich complexes [{(WCA-IDipp)E}MCl(η5 -C5 Me5 )] (5-8). The direct reaction of the lithium salts 1 and 2 with a half or a full equivalent of [M(COD)Cl]2 (M=Rh, Ir) afforded the monometallic complexes [{(WCA-IDipp)E}M(COD)] (9-12) or the bimetallic complexes [µ2 -{(WCA-IDipp)E}M2 (COD)2 (µ2 -Cl)] (13-16), respectively. The bonding situation in these complexes has been investigated by means of density functional theory (DFT) calculations, revealing thiolate or selenolate ligand character with negligible metal-chalcogen π-interaction.

Heterobimetallic Coinage Metal-Ruthenium Complexes Supported by Anionic N-Heterocyclic Carbenes.

The lithium complexes [(WCA-NHC)Li(toluene)] of anionic N-heterocyclic carbenes with a weakly coordinating borate moiety (WCA-NHC, WCA=B(C6 F5 )3 , NHC=IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) were used for the preparation of silver(I) or copper(I) WCA-NHC complexes. While the reactions in THF with AgCl or CuCl afforded anionic mono- and dicarbene complexes with solvated lithium counterions [Li(THF)n ]+ (n=3, 4), the reactions in toluene proceeded with elimination of LiCl and formation of the neutral phosphine and arene complexes [(WCA-NHC)M(PPh3 )] and [(WCA-NHC)M(η2 -toluene)] (M=Ag, Cu). The latter were used for the preparation of chlorido- and iodido-bridged heterobimetallic Ag/Ru and Cu/Ru complexes [(WCA-NHC)M(µ-X)2 Ru(PPh3 )(η6 -p-cymene)] (M=Ag, Cu, X=Cl; M=Ag, X=I). Surprisingly, these complexes resisted the elimination of CuCl, AgCl, or AgI, precluding WCA-NHC transmetalation.

Determination of the π-Accepting Properties of Borate-, Aluminate-, and Gallate-Functionalized N-Heterocyclic Carbenes by 77Se NMR Spectroscopy.

Anionic N-heterocyclic carbenes with weakly coordinating borate, aluminate, and gallate moieties of the type [(F5C6)3E-NHC]- (E = B, Al, Ga) were isolated as lithium salts by the lithiation of 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene (IMes) or 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene (IDipp) followed by the addition of E(C6F5)3 (E = B, Al, Ga). Treatment with elemental selenium afforded the lithium salts of the corresponding anionic selenourea derivatives [{(F5C6)3E-NHC}Se]- (NHC = IMes, E = B; NHC = IDipp, E = B, Al, Ga), which were examined, among other things, by means of 77Se{1H} NMR spectroscopy to assess the π-accepting properties of the WCA-NHC ligands in comparison with their neutral NHC congeners.

Palladium(0) complexes of diferrocenylmercury diphosphines: synthesis, X-ray structure analyses, catalytic isomerization, and C-Cl bond activation.

Palladium(0) phosphine complexes are of great importance as catalysts in numerous bond formation reactions that involve oxidative addition of substrates. Highly active catalysts with labile ligands are of particular interest but can be challenging to isolate and structurally characterize. We investigate here the synthesis and chemical reactivity of Pd0 complexes that contain geometrically adaptable diferrocenylmercury-bridged diphosphine chelate ligands (L) in combination with a labile dibenzylideneacetone (dba) ligand. The diastereomeric diphosphines 1a (pSpR, meso-isomer) and 1b (pSpS-isomer) differ in the orientation of the ferrocene moieties relative to the central Ph2PC5H3-Hg-C5H3PPh2 bridging entity. The structurally distinct trigonal LPd0(dba) complexes 2a (meso) and 2b (pSpS) are obtained upon treatment with Pd(dba)2. A competition reaction reveals that 1b reacts faster than 1a with Pd(dba)2. Unexpectedly, catalytic interconversion of 1a (meso) into 1b (rac) is observed at room temperature in the presence of only catalytic amounts of Pd(dba)2. Both Pd0 complexes, 2a and 2b, readily undergo oxidative addition into the C-Cl bond of CH2Cl2 at moderate temperatures with formation of the square-planar trans-chelate complexes LPdIICl(CH2Cl) (3a, 3b). Kinetic studies reveal a significantly higher reaction rate for the meso-isomer 2a in comparison to (pSpS)-2b.

Isoselective Polymerization of rac-Lactide by Aluminum Complexes of N-Heterocyclic Carbene-Phosphinidene Adducts.

The N-heterocyclic carbene-phosphinidene adducts (NHC)PH were reacted with AlMe3 in toluene to afford the monoaluminum complexes [{(IDipp)PH}AlMe3 ] and [{(IMes)PH}AlMe3 ] (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene, IMes=1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene). In contrast, the dialuminum complex [{(Me IMes)PH}(AlMe3 )2 ] was obtained for Me IMes=1,3-bis(2,4,6-trimethylphenyl)-4,5-dimethylimidazolin-2-ylidene. These complexes served as initiators for the efficient ring-opening polymerization of rac-lactide in toluene at 60 °C. High degrees of isoselectivity were found for the poly(rac-lactide) obtained in the presence of the monoaluminum complexes (Pm up to 0.92, Tm up to 191 °C), whereas almost atactic polymers were produced by the dialuminum complex. Detailed mechanistic studies reveal that the polymerization proceeds via a coordination-insertion mechanism with the carbene-phosphinidene ligands acting as stereodirecting groups.

Stabilization of a bismuth-bismuth double bond by anionic N-heterocyclic carbenes.

The bismuth dichloride complex (WCA-IDipp)BiCl2, which bears an anionic N-heterocyclic carbene ligand with a weakly coordinating borate moiety (WCA-IDipp, WCA = B(C6F5)3, IDipp = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene), was prepared by salt metathesis reaction between BiCl3 and the lithium salt (WCA-IDipp)Li·toluene. Subsequent two-electron reduction with 1,4-bis(trimethylsilyl)-1,4-dihydropyrazine afforded the dibismuthene (WCA-IDipp)2Bi2, which displays a bismuth-bismuth double bond.

Halogen Complexes of Anionic N-Heterocyclic Carbenes.

The lithium complexes [(WCA-NHC)Li(toluene)] of anionic N-heterocyclic carbenes with a weakly coordinating anionic borate moiety (WCA-NHC) reacted with iodine, bromine, or CCl4 to afford the zwitterionic 2-halogenoimidazolium borates (WCA-NHC)X (X=I, Br, Cl; WCA=B(C6 F5 )3 , B{3,5-C6 H3 (CF3 )2 }3 ; NHC=IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene, or NHC=IMes=1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene). The iodine derivative (WCA-IDipp)I (WCA=B(C6 F5 )3 ) formed several complexes of the type (WCA-IDipp)I⋅L (L=C6 H5 Cl, C6 H5 Me, CH3 CN, THF, ONMe3 ), revealing its ability to act as an efficient halogen bond donor, which was also exploited for the preparation of hypervalent bis(carbene)iodine(I) complexes of the type [(WCA-IDipp)I(NHC)] and [PPh4 ][(WCA-IDipp)I(WCA-NHC)] (NHC=IDipp, IMes). The corresponding bromine complex [PPh4 ][(WCA-IDipp)2 Br] was isolated as a rare example of a hypervalent (10-Br-2) system. DFT calculations reveal that London dispersion contributes significantly to the stability of the bis(carbene)halogen(I) complexes, and the bonding was further analyzed by quantum theory of atoms in molecules (QTAIM) analysis.

Chalcogen complexes of anionic N-heterocyclic carbenes.

Several group 16 adducts of the type [(WCA-IDipp)E]Li(solv.) that bear an anionic N-heterocyclic carbene ligand with a weakly coordinating borate moiety (WCA-IDipp, WCA = B(C6F5)3, IDipp = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene, E = O, S, Se, Te) were prepared. This was achieved by deprotonation of the corresponding ketone (IDipp)O or thione (IDipp)S with n-BuLi and subsequent reaction with B(C6F5)3 or by direct reaction of [WCA-IDipp]Li(toluene) with elemental Se or Te. The oxygen, sulfur and selenium adducts can be protonated to give derivatives (WCA-IDipp)EH (E = O, S, Se), whereas the oxidation of the sulfur and selenium adducts yielded neutral disulfide and diselenide species (WCA-IDipp)2E2 (E = S, Se).

N-Heterocyclic Carbene Analogues of Nucleophilic Phosphinidene Transition Metal Complexes.

Chloride abstraction from the complexes [(η6 -p-cymene){(IDipp)P}MCl] (2 a, M=Ru; 2 b, M=Os) and [(η5 -C5 Me5 ){(IDipp)P}IrCl] (3 b, IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) with sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (NaBArF ) in the presence of trimethylphosphine (PMe3 ), 1,3,4,5-tetramethylimidazolin-2-ylidene (Me IMe) or carbon monoxide (CO) afforded the complexes [(η6 -p-cymene){(IDipp)P}M(PMe3 )]BArF ] (4 a, M=Ru; 4 b, M=Os), [(η6 -p-cymene){(IDipp)P}Os(Me IMe)]BArF ] (5) and [(η5 -C5 Me5 ){(IDipp)P}IrL][BArF ] (6, L=PMe3 ; 7, L=Me IMe; 8, L=CO). These cationic N-heterocyclic carbene-phosphinidene complexes feature very similar structural and spectroscopic properties as prototypic nucleophilic arylphosphinidene complexes such as low-field 31 P NMR resonances and short metal-phosphorus double bonds. Density functional theory (DFT) calculations reveal that the metal-phosphorus bond can be described in terms of an interaction between a triplet [(IDipp)P]+ cation and a triplet metal complex fragment ligand with highly covalent σ- and π-contributions. Crystals of the C-H activated complex 9 were isolated from solutions containing the PMe3 complex, and its formation can be rationalized by PMe3 dissociation and formation of a putative 16-electron intermediate [(η5 -C5 Me5 )Ir{P(IDipp)}I][BArF ], which undergoes C-H activation at one of the Dipp isopropyl groups and addition along the iridium-phosphorus bond to afford an unusual η3 -benzyl coordination mode.

Group 13 Element Trihalide Complexes of Anionic N-Heterocyclic Carbenes.

A series of group 13 complexes of the general type [{(WCA-IDipp)EX3 }Li(solv)] (E=B, Al, Ga, In; X=Cl, Br) that bear an anionic N-heterocyclic carbene ligand with a weakly coordinating borate moiety (WCA-IDipp, WCA=B(C6 F5 )3 and IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) were prepared by the reaction of the respective group 13 trihalides (EX3 ) with the lithium salt [(WCA-IDipp)Li ⋅ toluene]. The molecular structures of the BBr3 , AlCl3 , AlBr3 , GaCl3 and InCl3 adducts were established by X-ray diffraction analyses, revealing the formation of coordination polymers linked by halide-lithium interactions, except for the indium derivative, which consists of isolated [Li(THF)4 ]+ and [(WCA-IDipp)InCl3 ]- ions in the solid state.

Pogo-Stick Iron and Cobalt Complexes: Synthesis, Structures, and Magnetic Properties.

The synthesis, structures, and magnetic properties of monomeric half-sandwich iron and cobalt imidazolin-2-iminato complexes have been comprehensively investigated. Salt metathesis reactions of [Cp'M(µ-I)]2 (1-M, M = Fe, Co; Cp' = η5-1,2,4-tri-tert-butylcyclopentadienyl) with [ImDippNLi]2 (ImDippN = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-iminato) furnishes the terminal half-sandwich compounds [Cp'M(NImDipp)] (2-M, M = Fe, Co), which can be regarded as models for elusive half-sandwich iron and cobalt imido complexes. X-ray diffraction analysis confirmed the structure motif of a one-legged piano stool. Complex 2-Co can also be prepared by an acid-base reaction between [Cp'Co{N(SiMe3)2}] (3-Co) and ImDippNH. The electronic and magnetic properties of 2-M and 3-Co were probed by 57Fe Mössbauer spectroscopy (M = Fe), X-band EPR spectroscopy (M = Co), and solid-state magnetic susceptibility measurements. In particular, the central metal atom adopts a high-spin (S = 2) state in 2-Fe, while the cobalt complex 2-Co represents a rare example of a Co(II) species with a coordination number different from six displaying a low-spin to high-spin spin-crossover (SCO) behavior. The experimental observations are complemented by DFT calculations.

XAS Analysis of Reactions of (Arylimido)vanadium(V) Dichloride Complexes Containing Anionic NHC That Contains a Weakly Coordinating B(C6F5)3 Moiety (WCA-NHC) or Phenoxide Ligands with Al Alkyls: A Potential Ethylene Polymerization Catalyst with WCA-NHC Ligands.

(Arylimido)vanadium(V) dichloride complexes containing anionic N-heterocyclic carbene (NHC) ligands that contain weakly coordinating B(C6F5)3 moieties (WCA-NHC) of the type [V(NAr)Cl2(WCA-NHC-Ar')] (5, Ar = 2,6-Me2C6H3, Ar' = 2,6- i Pr2C6H3) showed significant catalytic activity for ethylene polymerization in the presence of Al cocatalysts (MAO and Al i Bu3); the activity by the 5-MAO catalyst (19 500 kg-PE/mol-V·h; TOF 11 600 min-1) is the highest among those reported using the other (imido)vanadium(V) complexes in the presence of MAO, and the 5-Al i Bu3 catalyst showed higher activity (66 000 kg-PE/mol-V·h; TOF 39 200 min-1). The V K-edge X-ray absorption near-edge structure (XANES) analyses (in toluene) strongly suggest the formation of certain vanadium(III) species by reduction with Al i Bu3 accompanying structural changes; the EXAFS analysis suggests the presence of the arylimido ligand and one V-Cl bond (2.34 ± 0.04 Å), which is longer than those [2.1901(8)-2.2462(8) Å] in the reported (imido)vanadium(V) complexes. The XANES analysis of [V(NAr)Cl2(OAr)] strongly suggests the formation of the other vanadium(III) species by reduction with Me2AlCl or Et2AlCl, and the EXAFS analysis suggests the presence of the arylimido ligand and two V-Cl bonds (2.45 ± 0.03 Å). The XANES spectra showed no significant changes in both the pre-edge peak(s) and the edge peak when these complexes were treated with MAO, suggesting that the basic geometry and the high oxidation state were preserved under these conditions.

Formation of alkyne-bridged ferrocenophanes using ring-closing alkyne metathesis on 1,1'-diacetylenic ferrocenes.

Novel alkyne-bridged ferrocenophanes [fc{CO2(CH2) n C≡}2] (2a: n = 2; 2b: n = 3) were synthesized from the corresponding terminal diacetylenic ferrocenes [fc{CO2(CH2) n C≡CH}2] (1a: n = 2; 1b: n = 3) through ring-closing alkyne metathesis (RCAM) utilizing the highly effective molybdenum catalyst [MesC≡Mo{OC(CF3)2CH3}3] (MoF6; Mes = 2,4,6-trimethylphenyl). The metathesis reaction occurs in short time with high yields whilst giving full conversion of the terminal alkynes. Furthermore, the solvent-dependant reactivity of 2a towards Ag(SbF6) is investigated, leading to oxidation and formation of the ferrocenium hexafluoroantimonate 4 in dichloromethane, whereas the silver(I) coordination polymer 5 was isolated from THF solution.